WYSE TECHNOLOGY, INC

WY-964

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      CN1

  34-pin control cable connector - floppy drive           CN2

  10-pin serial port (COM2/4) - internal                  CN3

  10-pin serial port (COM1/3) - external                  CN4

  25-pin parallel port (LPT1/2) - external                CN5

  4-pin connector - Drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Index address 398, Data                JP7             pins 1 & 2
      address 399 enabled                                     closed

      Index address 26E, Data                JP7             pins 2 & 3
      address 26F enabled                                     closed

                       MISCELLANEOUS TECHNICAL NOTES

   Jumpers JP2, JP3, JP4, JP5, JP6, JP9, and JP11 are factory configured
  to pins 1 & 2 closed; JP8 and JP10 are factory configured to pins 2 & 3
                          closed - do not alter.